Imprimante POSTEK OX2r
| Model: | OX2r(Imprimante thermique Tunisie,Imprimante autocollant Tunisie,Imprimante code à barre Tunisie) |
| Print Mode: | Direct Thermal and Thermal Transfer |
| Print Resolution: | 203 dpi |
| Max Print Speed: | 18 ips |
| Max Media Width: | 4.72″ (120 mm) |
| Max Print Width: | 4.09″ (104 mm) |
| Max Print Length: | 196″ (5000 mm) |
| MPU: | 64-bit, quad Arm®Cortex®-53 core, maximum operating frequency 1.8 GHz |
| GPU: | GC NanoUltra 3D (1 shader) & GC320 2D OpenGL ES 2.0 |
| Memory: | 2 GB DDR4 RAM, 8GB managed NAND Flash |
| *HEAT™ Level①: | Ⅰ |
|
RFID Encoder: |
Supports UHF EPC Gen 2, ISO 18000-6C protocols |
| Media Roll: |
Maximum Media Width: 4.72″ (120 mm) Minimum Media Width: 0.39″ (10 mm) Maximum Outer Diameter: 9″ (228.6 mm) Inner Diameter: 1.5” (38mm) / 3” (76.2mm) |
|
Minimum Label Length: |
Tear-off: 0.2″ (5 mm) Peel-off: 0.47″ (12 mm) Cutter: A150/A400: 0.79″ (20 mm) AG120/AG300: 0.51″ (13 mm) Rewind: 0.2″ (5 mm) |
| Media Thickness: |
Regular RFID Label Printer: 0.0024″ ~ 0.012″ (0.06 ~ 0.305 mm), including liner Mount-on-Metal RFID Label Printer②: 0.063″ (1.6 mm) max., including liner |
| Ribbon: |
Maximum Length: 1968′ (600 m)Maximum Outer Diameter: 3.38"(86 mm)Inner Diameter: 1" (25.4 mm) Width: 0.79" to 4.33"(20 mm to 110 mm)
Ink side: both In and Out |
| Media Sensor: |
Upper reflective: detects black mark on face side Lower reflective: detects black mark on back side Transmissive: detects gap, notch, holes |
| Fonts: |
Five built-in dot matrix fonts, which include Basic Latin and Latin-1 Supplement character sets.Two built-in scalable fonts. One supports Latin, Greek and Cyrillic scripts, and the other is a GB2312 Chinese character set specifically.User downloadable TrueType fonts. |
| Barcode Types: |
1D Barcode: Code 39, Code 93, Code 128/subset A,B,C, Codabar, Interleave 2 of 5, UPC A/E 2 and 5 add-on, EAN-13/8/128, UCC-128, etc.2D Barcode: MaxiCode, PDF417, Data Matrix, QR Code, CS Code,etc. |
| Interfaces: |
RS-232 Serial, 10/100/1000Mbps Ethernet, USB DEVICE 2.0, USB HOST, Applicator Control General I/O Signal Interface (Optional), Applicator Peripheral Logic Control I/O Signal Wiring Terminal Block (Optional) |
| LCD Display: |
4.5" LCD Capacitive Touchscreen |
| Power Source: |
100 – 240 V， 50/60 Hz |
| Weight: |
21.4 kgs （ 47.08 lbs) |
| Dimensions: |
W 12" (305 mm) x D 22.05" (560 mm) x H 16.06" (408 mm) |
| Operating Environment: |
Temperature: 32°F ~ +104°F (0°C ~ 40°C)Relative humidity: 5% – 85% non-condensing |
| Storage Environment: |
Temperature: -40°F ~ +140°F (-40°C ~ 60°C)Temperature: 5% – 85% non-condensing |
① : HEAT ™, or Heating Equilibrium Adaptive Tuning, is a POSTEK designed and developed cutting-edge technology that sets the benchmark for heat management in thermal printing. Printers equipped with HEAT ™ have significant improvements in their printout clarity and print speed. The HEAT ™ level represents the fineness of the heating uniformity with level I being the finest.
② : For Mount-on-Metal RFID tags, the flexibility of the tag and whether or not to use fillings to bridge the gaps between tags can affect print quality and even encoding success rate. It is strongly recommended to test the tags on this POSTEK printer before purchasing.
Optional Items
*Accessories shall be installed at the factory
|
RFID Verifier*: |
External-mount module (Only available for RFID models) |
| Visual Verifier*: |
There are three software packages listed below for the visual verifier, and users can choose one from them based on needs and budget: 1.Verifies 1D & 2D barcode data. 2.Verifies 1D & 2D barcode data and grades printed barcode symbologies. 3.Verifies 1D & 2D barcode data, grades printed barcode symbologies, and inspects print defects. (An internal or external rewinder is required to keep the media flat without bending or buckling when passing through the visual scanning area.) |
| Automatic Peeler*: | A dedicated set of peeling rollers, along with an internal liner rewinder |
| Internal Rewinder*: | Maximum rewind roll diameter: 8" (203 mm) |
| Ribbon Saving Kit*: |
A second platen roller to feed media when printhead lifts to save ribbon.
(An internal or external rewinder may be required to use the Ribbon Saving function. The media will be advanced by the second platen roller when the printhead lifts to save the ribbon. In this case, a rewinder can help keep the media flat without bending or buckling when passing through the printhead area. Please contact a qualified professional to confirm.) |
| Cutters: | Type Rotary Cutter Guillotine |
| Model A150 A400A G120 AG300 | |
| Max. Cut Width 120 mm 120 mm 118 mm 118 mm | |
| Min. Cut Length 20 mm 20 mm 13 mm 13 mm | |
|
Cut Thickness
(white cardboard paper) 0.20 mm 0.20 – 0.35 mm 0.15 mm 0.3 mm |
|
| Cuts Guaranteed 600,000 600,000 600,000 600,000 |
Tous les services Tunitrack sont intégrés à notre structure, et assurés par des équipes hautement qualifiées, ce qui permet d’accéder à un niveau de service très performant, en proposant des solutions sur mesure, et d’en maîtriser parfaitement les coûts.
Si vous le souhaitez, vous pouvez opter pour nos solutions de financement qui incluent à la fois les équipements et leurs accessoires autour du POSTEK OX2r(Imprimante thermique Tunisie,Imprimante autocollant Tunisie,Imprimante code à barre Tunisie), mais aussi les prestations de services que vous aurez choisies.
Pour toute question complémentaire sur le POSTEK OX2r(Imprimante thermique Tunisie,Imprimante autocollant Tunisie,Imprimante code à barre Tunisie), nos services, ou encore nos solutions de financement, vous pouvez contacter notre service commercial qui se fera un plaisir de vous conseiller sur les solutions les mieux adaptées à votre projet, ou bien nous appeler au 70 93 50 78.
